Aluminium beam UHAP-2

Aluminium beam UHAP-2

The aluminium beam is anodized and fitted with attachments for splash protection and is also available in versions with fitted reflector strips.

UHAP-2 Underrun Hollow Aluminium Profile – second generation


Specification Intended for
frame width
B1 (mm)    B2 (mm)
Length
(mm)
Weight
(kg)
Part no.
UHAP-2
UHAP-2 with reflex
UHAP-2
UHAP-2
760-1300  760-1300
760-1300  760-1300
760-1300  760-1300
760-1300  760-1300
2400
2400
1900
2400
20,0
20,0
16,0
20,0
21-210800
21-210700
21-210900
21-595000

Type approval no.: E11*58R-025001

Bracket

Washers are always required for all drawbeam systems and endplates.

Part no.: 21-175000
Weight: 1 kg

Bracket for mounting on EUP, EUR-4 and EUF-2.

Part no.: 21-175178
Weight: 7,3 kg

Bracket for mounting on EUP RES.

Part no.: 21-618778
Weight: 6,1 kg

Bracket UPB for mounting on drawbeam system CMS 63V EU.

Part no.: 21-586578 (150)
Weight: 11 kg

Part no.: 21-587878 (100)
Weight: 9 kg

Endplate kit

Following endplates fits to UHAP-2:
EUH-2, EUT, EUM-2, EUS-4, EUP, EUR-4, EUL, EUS-MFC, UPS-2, UPSO-2, EUF-2 and CMS 63V EU/UPB.

Endplate kits fixed mounting

VBG has a range of different endplate kits for alternative installations of underrun protection. The hole configurations at the ends are adapted to the standard VBG drilling plan and can be combined with all our protection beam types.
The securing brackets are supplied finished as standard in basic manganese phosphate and a high-finish top coat giving good corrosion resistance.

EUH Endplate Underrun protection High mounting
EUM Endplate Underrun protection Medium mounting
EUS Endplate Underrun protection Short
EUP Endplate Underrun protection Plain
EUT Endplate Underrun protection Trailer
EUL Endplate Underrun protection Low

Endplate kits removable mounting

VBG has a range of different endplate kits for alternative installations of underrun protection. The hole configurations at the ends are adapted to the standard VBG drilling plan and can be combined with all our protection beam types.
The securing brackets are supplied finished as standard in basic manganese phosphate and a high-finish top coat giving good corrosion resistance.

EUR Endplate Underrun protection Removable

EUF-2

VBG’s hinged underrun protection makes it easy and convenient to lift the protective beam up and down when necessary, for example, to reach a low, inset underslung coupling.

EUF-2 Endplate Underrun protection Foldable – generation 2


The user-friendly design does away with difficult and dangerous work procedures. The underrun protection can be included as part of a flexible system adapted for driving large bulk centre-axle trailers, and can be installed together with a drawbeam from VBG’s DB range.
By using parallel brackets this creates more space for a centrally installed coupling when the protective beam is lifted up.

Specification Part no.
Endplate kit
Left
Right
Dead weight/pair
Type approval no.
See respective protective beam
21-176578
21-176678

31 kg
Accessories
Parallel bracket
Bolt kit for truck frame
Arm locking kit
21-179778
21-182400
21-187778

UPSO-2

Alternative brackets for protective beams that enable a moved backwards position for the underrun protection.

UPSO-2 Underrun Protection Sliding Operation – generation 2


The UPSO endplate kit may be mounted directly to the truck frame and also to all end plates for underslung DB drawbeams. The UPSO endplate kit allows lengthwise movement of up to 450 mm.

UPSO-2 may be mounted directly to the truck frame and also to following endplates: EDS, EDH-2, EDM, EDL, EDK, EDHZ, EDMS-2, EDC-1, EDH-2SKV, EDH-2SKH, EDK SC, EDM-2 and EDL-2.

Supplied in pairs.

Fits protective beam UHAP-2, UOSP and UCSP.

Specification Weight (kg) Part no.
UPSO-2 60
UPSO-2 50
UPSO-2 45/60
37,0
37,0
37,0
21-225778
21-571278
21-229678

UPS-2

Alternative brackets for protective beams that enable a moved backwards position for the underrun protection.

UPS-2 Underrun Protection Spacer – generation 2


The UPS attachment makes it possible to move in steps of 50 mm, up to max. 300 mm.

UPS-2 can be fitted to the following endplates: EUP 60, EUP 50, EUP 45/60, EUH och EUM.
Supplied in pairs.

Specification Weight (kg) Part no.
UPS-2 incl. bracket and bolts
Fits protective beam UHAP-2UPS-2 incl. bolts
Fits protective beam UCSP
15,5

12,0

21-230678

21-230778

Information drawing

Mounting instruction

Certificate

Spare parts

Established in 1972, Newbridge Metal has grown from a steel fabrication workshop, to a key partner in the supply of high profile innovative automotive and access products to local and multinational businesses throughout Ireland.

Address

13 Alder Road,
Naas Enterprise Park, Newhall, Naas, Co. Kildare

Contacts

Info@newbridgemetal.ie
(045) 431 502

Newbridge Metal Products Limited © 2018. All rights reserved.